Our Peristaltic Tubing Adapter Sets facilitate a secure connection between soft-walled, peristaltic tubing and more traditional, rigid-walled tubing. Through the use of a ribbed nose that fits securely inside the soft-walled tubing and a retainer sleeve that slips over the soft-walled tubing, this adapter firmly holds peristaltic tubing in place, while simultaneously allowing more permanent 1/16 OD tubing (e.g., FEP, PEEK, Stainless Steel) to be joined on the other end through the use of the Flangeless Fittings (included). These 2-pack sets allows you to make your own stoppered tubing assembly for use with some peristaltic pumps, while also minimizing the amount of soft-walled tubing that must be used in the fluid pathway. These adapters can be used with soft-walled tubing with a variety of inner diameters and outer diameters, as indicated.
| Manuals | |
|---|---|
Fittings GuideA practical guide to connections and fittings in your laboratory | Download |
- Fits tubing:
- up to 0.180" (4.55 mm) OD
- Type:
- adapter
- Unit of Measure:
- EA
- Catalog Page Number:
- 251
- Thru Hole (in):
- 0.03
- Thru Hole (mm):
- 0.75
- For Peristaltic Tubing ID (in):
- 0.048-0.110
- Primary Material of Construction:
- PEEK
- For Peristaltic Tubing ID (mm):
- 1.20-2.80
- For Peristaltic Tubing OD (in):
- up to 0.180
- For Peristaltic Tubing OD (mm):
- 4.55
- For Rigid or SemiRigid Tubing OD (in):
- 1/16
