Nebulizer, MicroMist, borosilicate glass, standard with Agilent 7700x/e, 8800 and 7500cx/ce series ICP-MS, for most sample types except those containing hydrofluoric acid or suspended particulates. When ordered for the 7500a, the spray chamber end cap, p/n G1833-65475, is also required Standard on 7700x/e, 8800 and 7500cx/ce
Suitable for most sample types except those containing HF or suspended particulates. When ordered for the 7500a, the spray chamber end cap (p/n G1833-65475) is also required.
Agilent's high quality ICP-MS Nebulizers disperse the measured sample solution from the peristaltic pump as a fine mist into the spray chamber. This is carried out using a stream of argon gas. There are three types of nebulizers available: Babington nebulizers for introducing samples with high matrix and high TDS (total dissolved salts) levels, concentric nebulizers for use with clean samples (available in Pyrex or quartz versions) and CrossFlow nebulizers which are the standard nebulizers for the ICP-MS inert kit. A full range of connection accessories including tubing, end caps, O-rings and other fittings are available for all models.
- Unit of Measure:
- EA
- Catalog Page Number:
- 437
