122-7133 - DB-HeavyWAX 30m, 0.25mm, 0.50um

Agilent
SKU:
122-7133
$789.00
Current Stock:
Adding to cart… The item has been added
  • Polyethylene glycol (PEG)
  • Maximum operating temperatures of 280 °C isothermal and 290 °C programmed
  • Fast analysis: shorter run times due to extended temperature limit
  • Retention time stability and increased column lifetime even when used at maximum operating temperatures
  • Ability to bake out the column at the end of the analysis to reduce sample matrix effect and limit carryover and the risk of ghost peaks

The Agilent J&W DB-HeavyWAX Polyethylene Glycol (PEG) is a high temperature WAX column that can operate at higher maximum temperatures compared to standard WAX columns. The higher maximum temperature limit allows for shorter run times, providing a lower cost per test. The column provides retention time stability and increased column lifetime, even when used at maximum operating temperatures. The ability to bake out the column at the end of the analysis reduces sample matrix effects, limiting carryover and the risk of ghost peaks. The column also exhibits very low bleed, which results in better signal-to-noise ratios and lower detection limits (LOD), especially for late eluting compounds.

Column Family:
DB-HeavyWax
ID:
0.25 mm
Film Thickness:
0.5 um
Length:
30 m
Type:
GC Column
Temp Limit (Celcius):
40 to 270/280
Unit of Measure:
EA
QTY:
ea
Phase:
DB-HeavyWAX
Polarity:
High Polarity
Format:
7" CAGE
Inner Diameter (ID):
0.25 mm
Capillary Column Phase:
DB-HeavyWAX
Capillary Tubing:
Fused Silica
GC Column Format:
7 inch
With Smart Key:
No
GC Column Type:
WAX