Tools
Wrenches
These tools can be used to tighten most of our knurled nuts in hard to reach places. For precise tightening the extender tools listed with 1/4" hex drives are designed to adapt to any torque wrench with a female 1/4" socket, such as the VHP-4000 Torque Driver. The tools featured on this page also include the FlushNut™ wrenches.
For your convenience, we offer wrenches in three standard sizes. You will need two A-304 wrenches to tighten most nuts into unions. The IDEX Wrench is slotted to fit over 1/16" and 1/8" OD tubing, and has 1/4" and 5/16" internal hex ends, to engage with the heads of the hex-head fittings most commonly used with Rheodyne® valves and the stainless steel fittings.
Removal Tool
Use the LT-300 Removal Tool to detach LiteTouch® and Super Flangeless™ Ferrules from tubing. Simply slide the appropriate tool blade slot between the lock ring and the ferrule body. With a slight twist, the ring will pop off, releasing the ferrule from the tubing. Please Note: This Removal Tool will not work with the LT-135 Ferrule System.
