Stainless Steel Tubing
Precut and Custom Length 316 Stainless Steel Tubing
For the chromatographer that has exacting requirements for today’s analyses, we recommend precut SS tubing. Thorough preparation guarantees that pre-cut SS tubing is truly ready-to-use, with flat-burr-free ends and a clean finish, which ensures zero dead volume connections and good chromatographic results. Each machine-cut end is polished, deburred on the edges and passivated.
| Stainless Steel | Fused Silica | PEEKsil | |
| OD (Outer Diameter) | 1/16" (1.55 mm) 1/8" (3.2 mm) |
0.0145" (360 µm) | 1/32" (785 µm) 1/16" (1.55 mm) |
| ID (Inner Diameter) | 0.004 - 0.080" (100 µm - 2.0 mm) |
0.0008 - 0.006" (20 - 150 µm) |
0.001 - 0.012" (25 - 300 µm) |
| Operating Temp | -41 - 289° C | -51 - 100° C | -51 - 100° C |
| Pressure Rating | — | — | 10,000 PSI (690 bar) |
| Typical Tolerances | 0.001" for 1*16" OD tubing 0.003" for 1/8" OD tubing |
0.0004" | 0.0004" |
| Refractive Index (clarity) | Opaque | 1.78 | Opaque |
| pH Range | 1-14 | 0-10 | 0-10 |
| Sterilization Techniques | Gamma irradiation; ethylene oxide; thermal |
Ethylene oxide; thermal | Ethylene oxide; thermal |
| Autoclavable? | Yes | Yes | Yes |
